September 25, 2022
RAM in windows 10

How to Check RAM In Windows 10

The RAM capacity of a computer determines the capacity of it to run multiple programs. Below are the steps for check the RAM in Windows 10.

Check the RAM in Windows 10

RAM (Random Access Memory) can be described as the memory in your computer that stores information needed to swiftly open Programs Applications, Files, and Programs.

In general how much RAM on a computer will determine the capacity of the computer to manage various applications and files.

If RAM isn’t present on a computer, the data needed to run programs can’t be stored in RAM and is subsequently buried on the computer’s hard drive.

If this occurs when this happens, the computer’s performance decreases because the operating system is needing to transfer data to slow hard drive (C:\pagefile.sys) instead of using the readily available information stored in RAM.

RAM types used in Computers

RAM (Dynamic Random Access Memory) and SRAM (Static Random Access Memory) are two of the main kinds of RAM that are available on the market.

While SRAM is more efficient than DRAM but it is expensive, requires more power, and can be found with a smaller storage capacity.

Therefore, DRAM or its faster versions such as SDRAM (synchronous DRAM), DDR SDRAM (Double-Data-Rate SDRAM) are utilized in personal computers.

RAM Form Factor

If you look up memory on Windows 10, you are likely to find that the Form Factor RAM listed in the form of DIMM (Dual Inline Memory Module) and SODIMM (Small Outline DIMM).

DIMMs have twice the capacity massive as SODIMMs and they are found utilized in servers and desktop computers and the smaller SODIMMs are utilized in Laptop computers.

1. Make sure RAM is checked in Windows 10 Using Settings

The Settings screen of Windows 10 provides good enough details about the RAM capacity installed and the usable RAM available on your system.

1. Open Settings on your PC and click the System tab.

2. On the next screen, scroll to the bottom and click on the word “About” in the left-hand pane. In the right-hand side you’ll be able to be able to see the amount of RAM on your PC under the “Device Specifications” section.

Note: The actual usable RAM is always smaller than the installed RAM.

2. Make sure RAM is checked using System Information Tool

Another method to test the RAM of Windows 10 is to make use of the built-in Microsoft System Information tool as it is available on your personal computer.

1. Right-click on the Start button and then click Run.

2. In the Run Command window you can type msinfo32.exe and then click OK.

3. On System Information screen, scroll down the right-hand pane until you find information regarding the RAM capacity on your system.

3. Make sure you have enough RAM by using Task Manager.

The Task Manger feature in Windows 10 provides detailed information about the RAM’s capacityand Form Factor, and the number of RAM slots that are used and accessible on your computer.

1. Right-click on the Start button, then click in Task Manager.

2. On the Task Manager screen, select the Performance tab, then click on memory in the lower left-hand pane. In the right-pane, will find information regarding RAM on your PC.

Like you see from the image above, the laptop computer comes with 8GB of RAM installed and the speed of memory is 2400 MHz.

In the exact same window, you’ll be able to see the RAM slots accessible to your PC.

In the above scenario the computer has one utilized and 1 RAM slot. The RAM slot that is available is able to be used to boost the capacity of RAM on the computer.

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments